The motor, from the English motor, was transformed by Japanese and passed to China as a motor. Motor is the meaning of movement and maneuvering. Therefore, the motor is very wide. Pneumatic, electric, hydraulic and other electric motors are just one ...
(1) The terminal voltage is too low. Refers to the voltage measured at the motor stator lead end when the motor is started or at full load, not the no-load voltage. When the motor load is constant, if the voltage is reduced, the current will increase...
The role of the motor: the electrical energy of the battery is converted into mechanical energy, driving the wheel of the electric vehicle to rotate, so as to achieve the purpose of continuous riding of the electric vehicle. When the motor is working...
1: The generator does not operate according to the specified technical conditions. If the stator voltage is too high, the iron loss increases; if the load current is too large, the copper loss of the stator winding increases; If the frequency is too ...
The most common problem with your problem is the clasp spring problem. During normal washing, the spring should be disengaged. Only when dehydrating, the spring will hold the inner and outer shafts. Since it is not detached from the rust for a long t...
If you’re trying to help your kid with his homework, there are many possibilities to make nice DC motors. I just made a very simple one in about five minutes, and i’ll try to upload the video for you. It isn’t the best way but it’s for sure the easie...
AC synchronous motors can only run at synchronous speed, which depends on the number of poles, but can never be more than 3600 rpm at 60Hz or 3000 rpm at 50 Hz. AC induction motors alway run slightly below the speed of a synchronous motor with the sa...
Please leave your Email or phone nomber, so we can contact you as soon as possible.