The motor is one of the most central components. Becaus […]
The motor is one of the most central components. Because of its large workload, if the user does not pay attention when using it, it will easily cause burnout. Combined with customer feedback and a thorough understanding of the dewatering machine, we learned that doing the following work can effectively prevent the dehydration machine motor from being destroyed.
The weight of the dry product of the industrial dewatering machine should be the maximum capacity. When the water is strong and the bulk of the cloth is large, we should also reduce the total load of the cloth to ensure that it is not overloaded. use.Motor For Exhaust Fan Manufacturers
In actual use, if it is found that the speed is reduced, or the body is shaking, we should immediately stop and take out some of the dry matter to reduce the load and return the speed of the dehydrator to normal.
When dehydration work, if abnormal noise or jitter occurs, we should cut off the power supply for inspection in time, and find out the cause, and then use it after eliminating the abnormality.
When the dehydrator is working, if you smell the baking paint or burnt, we should cut off the power immediately, find out the cause, and eliminate the two problems after the fault.
After each use, the accumulated water in the inner cylinder of the dehydrator should be cleaned and dried, and the water residue on the surface of the outer casing of the dehydrator should be dried to ensure the dryness of the whole body. For the dewatering machine with a cylinder cover, after the daily use is completed, the cover should be opened to let it dry naturally.